Jan 5, 2021 | Tech
NORTHVALE, New Jersey, USA – New Yorker Electronics has announced the release of Innodisk’s 96-layer 3D NAND flash product lineup, delivering advanced new flash storage technology to demanding industrial applications worldwide. The series includes two models: 3TE7 and 3TG6-P, with the former being DRAM-less and the latter using an external DRAM chip and a Marvell controller.
Both devices use pure industrial-grade 3D TLC NAND from Toshiba with a rated P/E cycle number of 3000, ensuring lasting endurance as required by many embedded applications. The firmware is optimized for industrial use. The SSDs strictly avoid SLC caching to avoid performance drops and increased write amplification that lower P/E cycle numbers through excessive data transfers within the SSD. This solid state drive (SSD) series is designed to tackle the tough conditions seen in many embedded environments and to handle the challenges of edge computing.
The Innodisk 2.5” SATA SSD 3TE7 is a SATA III 6.0 Gb/s flash-based disk that adopts the latest SATA III NAND controller with Innodisk’s exclusive L³FW architecture. The upgraded L³ FW architecture, combines Innodisk signature 4K mapping algorithm L² FW architecture with powerful LDPC technology. This ensures the 3TE7 series has outstanding high IOPS, improved data integrity and extended lifespan through reducing the bad block number happening. A built-in thermal sensor and iData Guard assures data integrity and reliability of the 2.5” SATA SSD 3TE7 for industrial applications.
The Innodisk 2.5” SATA SSD 3TG6-P is a SATA III 6Gb/s solid state disk, which delivers top performance especially in random data transfer rate. Its reliability makes it ideal for embedded systems, industrial computing and enterprise fields. The 3TG6-P 2.5” SSD is designed with Innodisk-owned technology to ensure the data integrity and highest levels of reliability.
The modules can incorporate AES encryption for data security and End-to-End Data Path Protection to ensure error correction at every point of data transfer. The modules can also be fitted with Innodisk’s trio of power stabilizing technologies iCell™, iPower Guard™ and iData Guard™ to further strengthen data integrity in areas susceptible to power fluctuations.
Features & Benefits:
- Vibration: 20G @7~2000Hz
- Shock: 1500G @ 0.5ms
- Storage Temperature: -55°C ~ +95°C
- MTBF: 3 million hours
- 6 W
Applications:
- 5” SATA Slim SATA III solution for industrial field
- High IOPS
- iSMART disk health monitoring
- AES-256 encryption (3TE7)
- iPower Guard for protecting unstable start up and shut down (3TE7)
- iData Guard for abnormal power failure
As a franchised distributor for Innodisk, New Yorker Electronics supplies the full portfolio of Innodisk Flash Storage products including SSD, SATADOM, mSATA, Embedded Disk Cards, as well as Embedded, Server, Wide-Temperature and Customized Draw Modules and Embedded Peripherals.
About New Yorker Electronics
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).
Jan 5, 2021 | Tech
NORTHVALE, New Jersey, USA – New Yorker Electronics has announced the release of the new SSA Smart Current Sensor series from Riedon. Riedon’s new Smart Shunt SSA combines low-impedance manganese shunt resistance, a high-precision insulated amplifier, and an isolated DC/DC converter.
Riedon’s SSA family of Isolated Smart Current Measurement Technology consists of four current ratings: 100A, 250A, 500A and 1000A. This makes them suitable for use in high-power applications, where harsh conditions may be an issue, such as with elevated temperature levels, heavy vibrations and electro-magnetic interference (EMI). They are therefore ideal for use in electric vehicle (EV) and hybrid-electric vehicle (HEV) traction inverters, AC/DC converters, uninterruptible power supplies, renewable energy generation sites and smart grid infrastructure.
The SSA is insensitive to magnetic fields, and, unlike Hall-effect sensors, can be freely positioned without the need for additional shielding. This allows for more flexibility during development. These next-generation current sensing modules combine the attributes of conventional passive shunt resistors with those normally associated with considerably more expensive and bulky closed-loop Hall Effect current sensors. Each featuring a built-in precision amplifier, they offer reinforced electrical isolation (up to 1500VDC), alongside industry-leading levels of stability and accuracy. Shunt-based systems are generally easier to implement because they are more linear and offer higher current measurement accuracy than Hall-based methods.
The new SSA devices feature 1500 VDC/1000 VAC RMS reinforced isolation, ± 0.1% initial sensing accuracy, ± 0.1% linearity over current range, unipolar power supply, differential analog output and 300kHz bandwidth. The series offers a differential output and can be connected directly to most microcontrollers (MCUs). According to Riedon, it is currently the industry’s only amplifying active shunt with an analog output.
With far less susceptibility to temperature drift, the need for routine calibration can be eliminated. They also have a rapid response time of less than 1.5μs. The amplified analog output and integrated protection enables these current sensors can be placed on either the high or low side of a circuit, thereby enabling easy integration. Physical construction consists of a power bus bar with an isolated sensor housing encased around the center of the bar. A JST JWPF series four-pin connector provides the interface to (1) power, (2) ground, (3) +Vin and (4) –Vin for the encapsulated sensor. The corresponding mating connector is JST type J04R-JWPF-VSLE-S (housing) and SWPR-001T-P025 (contact).
The differential output effectively negates the Thermo-EMK and eliminates all associated deviations that arise due to a temperature gradient above the block. Unlike other shunt solutions, the fully UL94-V0 encapsulated block provides enhanced isolation of 1500VDc (1000 VACeff), which allows it to be mounted in inverters on the high-side, although the installation on the low-side is recommended as best practice.
Since the SSA contains an amplifier, the resistance value is extremely low, because the detected voltage is multiplied internally. Therefore, the power dissipation for measuring currents up to 1000 A is in the range of 5 to 20 W. The robust module includes an AEC-Q100 certified insulated amplifier from Texas Instruments and is therefore also suitable for the strict automotive applications that must cover the extended operating temperature range from -40 to 125 °C.
The insulated amplifier offers a differential output with a number of advantages. If a single-ended signal is required, this can be provided with a simple operational amplifier circuit (OPV). The differential output of the isolated amplifier is often converted into a single-ended analog output with an OPV-based circuit. This circuit can also implement a low-pass filter to further reduce the signal bandwidth to a desired bandwidth, thereby improving the noise performance of the system.
Optional Mounting Hardware and Cable Assembly
For ease of mounting, an optional mounting fixture, the SSA-BASE, is available for models SSA-100 thru SSA-500. It is constructed of UL 94-V0 rated materials and uses 5/16-18 stainless steel hardware. An optional connector cable assembly, the SSA-CABLE-1M, is also available. The 1-meter standard cable is compatible with all SSA models.
Features & Benefits:
- 100A to 1000A
- 1500VDC Reinforced Isolation
- Amplified Output
- 1% Tolerance
- Compared to Hall Effect Technology:
» Superior Overall Current Measurement Accuracy
» Unipolar Power Supply
» Lower Temperature Drift
» No Periodic Calibration
» Higher operating temperature range
Applications:
- Battery Systems
- UPS systems
- Motor Drives
- Frequency In
As a franchise distributor for Riedon, New Yorker Electronics supplies Riedon’s full lineup of Power Resistors, Precision Resistors, Surface Mount Resistors, High Temperature Resistors, High Power Resistors and Custom Resistors.
About New Yorker Electronics
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).
Jan 5, 2021 | Tech
NORTHVALE, New Jersey, USA – New Yorker Electronics has announced the launch and release of Exxelia Dearborn 560P product series, providing unsurpassed performances at high temperature. Exxelia, an established designer and manufacturer of complex yet cost-effective passive components, resistors & sub-systems dedicated to harsh environments, designed the 560P as a cost-effective solution for high reliability and for performance in severe environments.
Exxelia’s 560P product series combines electrical performance between BOPP & PET while exhibiting a higher operating temperature and a longer lifetime. The PTFE 560P series is an ultra- stable 180°C Film capacitor, with a rated stability of less than 2.5% with capacitance from 0.22μF to 1μF under 250VDC to 800VDC. It offers the lowest loss characteristic of all film technologies less than 0.1% at extreme temperatures (to 200°C) with excellent life performance in operations.
The series offers resistance to vibrations, shocks and to over voltage making it ideal for Oil & Gas applications as well as Aerospace, Defense and Civil Aviation. With absolutely no derating up to 150°C, this dielectric polymer film capacitor supplants high temperature ceramics and tantalums being an ideal choice for many capacitor applications in harsh environments, such as DC Link and AC Filtering.
The series is constructed of non-inductive wound metallized polymer film housed in a case of flame retardant tape wrap and high-temperature resin end fill. The lead material is 0.200 to 0.500 in. of copper clad steel with 0.500 in. tinned copper wire and the lead strength is capable of withstanding a five-pound pull force on lead axis. Voltages from 320VDC to 800VDC are available with capacitance values from 0.022μF to 10μF and standard tolerances of ±10% or ±5%.
PTFE is the only film able to preserve its properties beginning from cryogenic temperature up to 200°C, making it suitable for high-temperature, sampler-blocker and stopping sampler applications. Polystyrene (PS) capacitors are perfect as precision capacitors for time constant and filter applications in aeronautics, defense, rail, telecom and medical fields.
Earlier this year, New Yorker Electronics released another high-temp capacitor, the 253P series, with operating temps to 200°C with no derating. Both series are available with a high degree of customization, such as tighter tolerances available upon request. Samples are now readily available for evaluation from New Yorker Electronics.
Features & Benefits:
- High temperature to +180°C
- Stable Performance through Temperature/Voltage Range
- Rugged/Lightweight Construction
- Manufactured in U.S.
- Many lead configurations and housings
- Polymer Dielectric
- High Degree of Customization available
Applications:
- Aerospace & Defense
- High Temperature Modules
- Industria
New Yorker Electronics is a franchise distributor of Exxelia Dearborn of the Exxelia Group and supplies its full line of Film, Mica, Tantalum, Aluminum Electrolytics and Ceramic Capacitors as well as its EMI/RFI Filters, Magnetics, Position Sensors, Slip Rings and Rotary Joints.
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in constant accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).
Jan 5, 2021 | Tech
NORTHVALE, New Jersey, USA – New Yorker Electronics has released the new advanced interface options of the UMR-AA and UMR-A Series of High Voltage Power Supplies from Dean Technology (HVPSI). Using additional pins, the advanced interface options provide for enhanced adjustment and monitoring features consistent with industry standards and known customer needs. The V05 and V10 options are available with +5VDC and +10VDC reference, control and monitoring respectively.
The V05 and V10 options are important additions to DTI’s standard power supply offerings. These advance interface options supplied by New Yorker Electronics allow both the power supply output voltage and current to be monitored and adjusted with the same scaling and include a +5VDC or +10VDC reference voltage. Signals are from 0 to +5VDC (V05) and 0 to +10VDC (V10) for all models and polarities of both the UMR-AA and UMR-A series.
Output monitoring signals are fully buffered with high input impedance to ensure consistent accuracy regardless of load conditions. The low impedance outputs provided by these options also have a programming accuracy that makes them ideal for integration into any variety of systems including those with digital and PLC control.
Features & Benefits:
- Adjustable Output
- ARC/Short Protected
- Current Monitor
- Encapsulated
- High Efficiency >70%
- Low Ripple
- Non-Metallic Case
- Regulated
- Voltage Monitor
Applications:
- Cable Thumping
- Detectors
- Dielectric Testing
- Electrostatic Air Cleaners
- Electrostatic Oil Cleaners
- Electrostatic Painting
- ESD Testing
- High Voltage Bias
- Ink Jet Printing
- Ion Beams
- Ionizers
- Leakage Testing
- Particle Analyzer
- Photomultipliers
- Piezoelectric Driver
- Powder Coating
- Pulse Generators
- UltraSonics
All models in the UMR-AA and UMR-A series are now available from New Yorker Electronics with the V05 and V10 advanced interface options immediately, and are ready for use in countless applications. New Yorker Electronics is a franchised distributor of Dean Technology, including its three main product lines, CKE, HVC and HVPSI. HVPSI manufactures the PMT Series and other high voltage power supplies, multipliers and test equipment.
About New Yorker Electronics
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).
Jan 5, 2021 | Tech
NORTHVALE, New Jersey, USA – New Yorker Electronics has announced its release of the new Excel Cell Electronics (ECE) ESR5 series of Power Type Solid State Relays. These Solid State Relays, available with or without LED Indicators, are commonly used in security, industrial, high power equipment, HVAC and control panels. ESR5 Solid State Relays offer AC and DC outputs and have a wide variety of available voltages including 60V, 120V, 240V, 280V, 380V and 480V.
Another important feature of this series is that they are optically isolated, meaning they have an array of photo sensors isolating the input from the output side, leading to the ESR5’s low input power consumption. Other physical characteristics include its zero voltage turn-on, zero voltage turn-off to minimize EMI EMI/RFI) and its output snubber circuit protection. It also has a high surge rating to allow lamp and motor load switching.
There are several advantages of ECE’s SSRs to versus electromechanical devices, including: low power consumption, low leakage current, stable on-resistance, high reliability, extremely long life and a small size. They exhibit fast switching speeds, high vibration and shock resistance with no switching noise from contact bounce.
The ESR5 includes an input LED indicator and supplies high DV/DT and a high blocking voltage. It is also both TTL and CMOS compatible. New Yorker Electronics also supplies the optional ECE Protective Safety Cover. Being transparent, the cover allows the LED to reach full intensity without being overdriven.
Features & Benefits:
- Optically Isolated
- Input LED indicator
- High DV/DT and high blocking voltage
- Low input power consumption
- TTL and CMOS Compatible
Applications:
- Security
- Industrial
- High Power Equipment
- HVAC
- Control Panels
New Yorker Electronics is a franchise distributor of Excel Cell Electronic (ECE) and supplies its full line of Dip and Micro Switches, Connectors, Terminal Blocks, Relays, Chip Inductors, Chip Beads and Resettable Fuses.
About New Yorker Electronics
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).
Jan 5, 2021 | Tech
NORTHVALE, New Jersey, USA – New Yorker Electronics has announced the release of the newest Rectron Bridge Rectifiers in 2-, 3- and 4-amp for reduced bridge size. The three new single-phase glass passivated series, the 2A MSB201S-7S, the 3A MSB301S-7S and the 4A MSB401S-7S are 6.6mm x 8.1mm x 1.4mm with up to a 120A surge rating.
The MSB201S, MSB301S and MSB401S have a max surge current of 60A, 100A and 120A, respectively. There are seven versions of each MSB series, with Maximum Recurrent Peak Reverse Voltages and Maximum DC Blocking Voltages ranging from 50V to 1000V and a Maximum RMS Bridge Input Voltage from 35V to 700V.
With a voltage range of 50 to 100 volts, these Single-Phase Surface Mount MSBS Bridge Rectifiers are ideal for automation insertion and printed circuit boards. They can be mounted in any position, have a 1000VR, a maximum surge current of 60A-120A and a 1.1VF. They are designed with a reverse current of 1.0uA and a recovery time of less than 60Hz. All three SMD/SMT series are packaged in a 4-SMD, flat lead (MSB-S type) case.
UL listed with a 94V-O flammability classification, the devices are RoHS3 compliant and are available halogen-free, in tape and reel. They have a typical current squared time of 14.94S and have an operating temp of -55°C to + 150°C.
Features & Benefits:
- Good for automation insertion
- Ideal for printed circuit board
- Reliable low cost molded construction
- Glass passivated device
- Mounting position: Any
Applications:
- Converting AC power to DC
- AC power devices
- home appliances
- motor controllers
- modulation process
- welding applications
As a franchise distributor for Rectron Semiconductor, New Yorker Electronics supplies its full line of Bridge Rectifiers, ESD Diodes, High Voltage Rectifiers, Recovery Rectifiers, Schottky Diodes, Signal-Switching Diodes, Silicon Carbide (Sic) Schottky, Standard Rectifiers, Transistors, Transient Voltage Suppressor (TVS) Diodes, Zener Diodes and MOSFETs.
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).
