Jan 5, 2021 | Tech
NORTHVALE, New Jersey, USA – New Yorker Electronics has announced the introduction of Vishay’s industry first 4-Quadrant Silicon PIN Photodiode in a standard surface-mount package, qualified for automotive applications. Combining high photo sensitivity with low 0.1% electrical segment to segment crosstalk and virtually no tolerance between its segments, the Vishay Semiconductors K857PE enables a variety of sensor and control applications for the automotive, consumer and industrial markets.
This new device combines four monolithic diodes integrated into a single 4.72mm x 4.72mm x 0.8mm top-view, surface-mount package. The defined gap between the K857PE’s four radiant sensitive areas allows for reliable measurement during laser positioning. The opaque package sides eliminate stray light irradiating the photodiodes, resulting in excellent signal to noise ratio while the linear photo response enables small signal detection.
Another important feature is that the current from each of the device’s PIN diodes can be processed individually. This results in low 0.1 % electrical crosstalk and virtually no tolerance between segments.
The Vishay K857PE retains an active area of 1.6 mm2 per quadrant and provides a floor life rating of 168h, in accordance with J-STD-020. It has a wide sensitivity range from 69 nm to 1050nm, a 8.5µA reverse light current and a ± 60° angle of half sensitivity. The device is AEC-Q101 qualified, RoHS-compliant, halogen-free and Vishay Green.
Features & Benefits:
- Four monolithic diodes integrated into a single 4.72mm x 4.72mm x 0.8mm top-view, surface-mount package
- Active area of 1.6mm2 per quadrant
- AEC-Q101 qualified
- Low electrical crosstalk
- Virtually no tolerance between segments
- Wide sensitivity range from 690nm to 1050nm
- 5µA reverse light current
- Daylight blocking filter
- ±60° angle of half sensitivity
- RoHS-compliant, halogen-free, and Vishay Green
- Floor life of 168 h in accordance with J-STD-020
Applications:
- Small signal detection for automotive rain / light sensors
- Industrial automation systems
- Laser beam alignment
- Virtual reality
Vishay Semiconductors includes the former Vishay Telefunken product lines, the former General Semiconductor product lines, the infrared component product lines acquired from Infineon Technologies, and selected product lines acquired from International Rectifier (excluding planar high-voltage MOSFETs). As a franchise distributor for Vishay Semiconductors, New Yorker Electronics supplies its full portfolio of rectifiers, fast-recovery diodes, high-power diodes and thyristors, small-signal diodes, Zener and suppressor diodes, RF transistors, optoelectronics, power modules (a combination of power diodes, thyristors, MOSFETs, and IGBTs), and automotive modules and assemblies.
About New Yorker Electronics
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).
Jan 5, 2021 | Tech
NORTHVALE, New Jersey, USA – New Yorker Electronics has released the new Vishay Siliconix Automotive Grade SQJ152ELP MOSFET, a technically advanced upgrade to the Vishay SQJ858AEP. This 40V, 5.5mΩ TrenchFET® Gen IV in a PowerPAK® SO-8L is an Automotive N-Channel 175°C MOSFET.
Combining upgraded performance figures and robustness, the SQJ152ELP is well-suited to replace the SQJ858AEP in new designs for multiple automotive applications, including solid state relays, high side switches, motor drive controls and other safety and convenience systems. The device’s package construction employs a wire-free design that extends the MOSFET’s drain current capabilities, while reducing its thermal resistance. Compared to the SQJ858AEP, the SQJ152ELP’s continuous drain current rating has increased by 112-percent.
The SQJ152ELP’s typical RDS(ON) – Qg FOM at a VGS of 4.5 V is 61mΩ × nC, which is the lowest among similar products with RDS(ON) of 4.5mΩ to 6.5mΩ. Its 38-percent lower Qg reduces gate driver related power losses and contributes to the class-leading FOM, which, according to Vishay, is five percent lower than the next best product on the market.
In addition to its improved electrical parameters, the PowerPAK SO-8L package offers proven board-level reliability capabilities. Its internal construction and external gullwing leads are engineered for maximum stress relief during extremes of thermal and mechanical stress. The package has passed extended powered temperature cycling and rapid temperature cycling, as well as PCB flexing and vibration tests.
Features & Benefits:
- Class-leading RDS(on) – Qg FOM of 61 mΩ × nC at a VGS of 4.5 V
- Wire-free construction reduces parasitic inductance
- Test-proven, enhanced board-level reliability
- Passed power temperature cycling, board dropping, flexing, and vibration tests
- RoHS compliant, Halogen free, AEC-Q101 qualified, 100% Rg and UIS tested
Applications:
- Automotive Applications:
- Relays
- High Side Switches
- Motor drive controls
- Safety & Convenience Systems
As a franchise distributor, New Yorker Electronics supplies Vishay Siliconix power semiconductor products including low-voltage power MOSFETs (metal-oxide semiconductor field-effect transistors), higher-voltage Vishay Siliconix power MOSFETs and Power ICs.
About New Yorker Electronics
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).
Jan 5, 2021 | Tech
NORTHVALE, New Jersey, USA – New Yorker Electronics has announced the release of the new Vishay BC Components 190 RTL Aluminum Capacitors for increased design flexibility and board space in high temperature applications. The new Automotive Grade miniature aluminum electrolytic capacitors offers high ripple currents up to 3.36A, operating temperatures to +125°C and up to 6,000 hours of usable life.
Compared to previous-generation solutions, the Vishay BC Components 190 RTL capacitor series offer lower impedance and 10 to 15% higher ripple current. This allows designers to utilize fewer components, increasing design flexibility and saving board space. In addition, the AEC-Q200 qualified devices are available in smaller case sizes, ranging from 10mm by 12mm up to 18mm by 35mm.
As polarized aluminum electrolytic capacitors with a non-solid electrolyte, the RoHS-compliant devices are ideally suited for smoothing, filtering and buffering in switch mode power supplies and DC/DC converters for high temperature industrial, automotive, telecommunications, medical and military applications.
Featuring radial leads and a cylindrical aluminum case with pressure relief, insulated with a blue sleeve, the 190 RTL series offers rated voltages up to 50V, capacitance from 100µF to 6800µF and low maximum impedance down to 0.017 Ω. The series of aluminum electrolytic capacitors are also charge and discharge proof.
Features & Benefits:
- High ripple currents up to 3.36A
- High temperature operation to 125°C
- Very long useful life of 6,000h at 125°C
- AEC-Q200 qualified
- Available case sizes ranging from 10mm x 12mm up to 18mm x 35mm
- Rated voltages up to 50V
- Capacitance from 100µF to 6800µF
- Low maximum impedance down to 0.017
- Charge- and discharge-proof
- RoHS-compliant
Applications:
- Industrial
- Automotive
- Telecommunications
- Medical
- Military
As a franchise distributor of Vishay BC Components, New Yorker Electronics supplies its full line of thin film and carbon film MELF resistors, thin film and cermet film chip resistors, leaded metal film and carbon film resistors, thin film chip arrays and thin and thick film chip fuses, leaded metal film and metal glaze resistors, non-linear and variable components and ceramic, aluminum, and film capacitors.
About New Yorker Electronics
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).
