Light chips have gained popularity in the lighting technology because of their many uses. For a continued operation of a led post top fixture, it needs to be fitted with a driver, and this is why many traditional led post top light fixtures needed a driver that was used in controlling the electrical current so that it could supply clean DC power to it. The driver acts as a current in a specific range that is large enough to power the LED, but is also sufficient to prevent any permanent damage.
However, these drivers have their own shortcomings, which is why our driverless post top fixture were invented. You may want to know what it means to the driverless post top led bulb. The driverless post top light fittings use a high voltage circuit that is equipped with an adjustment and replacement chip that helps to change the number of led chips in the string during the cable cycle to ensure that the string voltage of the LED matches the cable voltage. This new technology adopts the IC on board in order to replace the usual driver. With a driverless led post top fixture, you can extend the life without electrolytic capacitors. It is different from ordinary products with drivers.
Advantages of the New Driverless Led Post Top Light Fixture
Removing the LED driver creates a lot of room for innovation and creativity. The result is a simpler, flatter and more compact design. These driverless IC post top fixtures are easier to move around, and unlike their counterparts, their manufacturing costs are reduced. Our IC driver technology post top light fittings are also cheaper and require little maintenance. This means saving more money by replacing this driverless post top led bulbs or energy bills. The process of installing a driverless led post top fixture is easier and faster than previous led post top light fxiture. These driverless led post top fixture are lightweight, equipped with a simple and straightforward fitting. This means you can save on a lot of labor costs.
Driverless IC technology post top fixtures will reduce maintenance costs. This is because the driver is prone to failure and needs to be replaced. This can be a complicated process that requires trained personnel and equipment. All of these will cost a lot of money. This can also be inconvenient, either shutting down your business premises during repairs or having to spend endless hours while supervising your ongoing work. Using driverless technology IC post top light fittings will eliminate all these inconveniences.
Driver on board version: The DOB version is more stable and reliable for the following reasons. It uses a smart integrated circuit to control the current of the led post top fixture, which means it does not use a transformer or capacitor like a constant current driver. The integrated circuit has a special function, that is, set safe overheat protection. When the chip temperature exceeds the safe level, the integrated circuit will automatically reduce the power of the led post top light fixture, allowing it to cool and return to a safe level. This helps protect the IC driver post top fixture.
Energy saving: Unlike other types of led post top light fixture, our post top fixture has a high energy efficient. This is because these post top light fittings tend to consume less power and you can even save up to 80% on electricity bills compared to other post top fixture. When you combine this led post top fixture with a smart photocell sensor or motion sensor, you will be able to save even more electricity bills. Another advantage is that they are long lasting and cool. A IC driver technology post top led bulbs can make you 10 times longer than a fluorescent light, and it doesn’t generate many heat when turned on.
Any kind of led post top fixture will distribute light evenly like other post top fixture, and this is no exception. When using powerless led post top light fixture, you’ll notice a 8% increase in lighting uniformity. Another great feature is that they have less optical distortion and less static buildup than fluorescent and CFL lamps.
Some Applications for a Driverless LED Post Top Light Fixture.
In most cases, our led post top fixture is used in large areas with round poles or square poles such as backyards, parking lots, gardens, campus, roadway and other residential areas. These areas require high quality led post top light fixture to improve safety and performance.
Why You Should Opt for Driverless Led Post Top Light
Our IC driverless post top light fittings has many advantages such as low manufacturing, maintenance and installation cost, reasonable design, beautiful appearance, strong innovation ability, etc., and no driver is used in the process of manufacturing these lamps, so the production cost is low. This means our driverless post top led bulbs are cheaper than any other post top fixtures.
