If you want to know how to go about cleaning hardwood floors, then you are in the right place. Read the information given below to gain knowledge on hardwood floor finishing techniques.
Hobart, 16th May 2019: Do you have hardwood flooring at home? If yes, then here are a few problem areas that you need to be aware of before sanding hardwood floors. When you go about cleaning the hardwood floor, you will be surprised to see deep scratches on its surface. You cannot make these scratches go away completely, but, you can make them less noticeable. According to flooring experts, applying a wet coat of mineral spirits will show a similar result to a coat of polyurethane. On light coloured hardwood floorings, the soft and smooth coat of mineral spirits would not only darken the scratch but also hide it.
On the other hand, if the above solution fails to work, then you need to rely on a high-quality wood stain. You can apply this solution using a cotton swab. If you look at the scratches closely, you will realise that the scratch is rough and porous and as a result, it would easily absorb a large amount of wood stain. However, check out the list of measures you need to be mindful about before sanding hardwood floors:
Tips you need to know about the floor finishing process
- You can start the floor cleaning process by experimenting with the stain. Begin the process by paying attention to lighter stains. Experts state that to see best results, one should add two stain colours to match both the lighter and darker patterns on the flooring.
- High-traffic areas wear out faster and should be catered first. You need to wet the area using mineral spirits and check how it would look with a generous coat of polyurethane. You can leave the floor in the same condition for at least two days.
- Take a close look at the ridges. The sharp and protruding points on the surface of the floor may cause discolouration and may also wear down the polish of the wood on high spots. This may even make it impossible for one to walk on the area.
Opting for hardwood floor installation is definitely a wise choice and if you want to create a warm and natural ambience, then you can rely on it without a second thought.
