New Innodisk Blockchain SSD Flash Storage Solution Fortifies Radical Edge Data Integrity

May 15, 2021 | Business

New Yorker Electronics has released the newest Innodisk SSD solution, the InnoBTS™ SSD, integrated with Innodisk’s new patented blockchain technology. The increasing presence of AI in everyday applications brings concerns about data integrity and validation.

With this new solution, Innodisk combines blockchain technology to secure the valuable data in recent IoT scenarios, such as POS system at unmanned stores, smart meters and digital ID cards from third-party access. The important data written to the SSD will create an encrypted hash string that corresponds to the specific data set, and the encrypted hash string is spread on the blockchain network, essentially creating a decentralized ledger that is distributed between numerous unique computers. The process is to make encrypted hash string to be “chained” on the blockchain network. If tampering happens, the chained data is checked with encrypted hash string on the network, clearly showing any discrepancies.

The InnoBTS SSD incorporates hardware-run digital signature. Through the sophisticate use of private and public keys given to each file that is sent, the receiver can always verify the correct sender. The SSD creates and secures the private key within an internal safety zone, ensuring maximum private key security. Only the public key will be available for anyone to verify the correct sender.

The new InnoBTS SSD series benefits from blockchain technology and data streaming combines to create an industry-leading solution for data integrity at the edge. Removing the need for software eases system integration as well as strengthening data integrity by moving the functions to the more inaccessible SSD firmware.

Innodisk’s solution allows for easy blockchain setup for edge applications that is not reliant on software, and meanwhile connects numerous devices to the blockchain network. This makes the InnoBTS™ SSD suitable for cutting-edge AI applications such as smart cities, smart vehicles, smart factories and intelligent surveillance.

As a franchise distributor, New Yorker Electronics supplies Innodisk’s full line of Flash Storage products including SSD, SATADOM, mSATA, Embedded Disk Cards, as well as Embedded, Server, Wide-Temperature and Customized Draw Modules and Embedded Peripherals.

About New Yorker Electronics
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).

New Yorker Electronics Delivers Advanced New 96-Layer 3D NAND Flash Storage from Innodisk

Jan 5, 2021 | Tech

NORTHVALE, New Jersey, USA – New Yorker Electronics has announced the release of Innodisk’s 96-layer 3D NAND flash product lineup, delivering advanced new flash storage technology to demanding industrial applications worldwide. The series includes two models: 3TE7 and 3TG6-P, with the former being DRAM-less and the latter using an external DRAM chip and a Marvell controller.

Both devices use pure industrial-grade 3D TLC NAND from Toshiba with a rated P/E cycle number of 3000, ensuring lasting endurance as required by many embedded applications. The firmware is optimized for industrial use. The SSDs strictly avoid SLC caching to avoid performance drops and increased write amplification that lower P/E cycle numbers through excessive data transfers within the SSD. This solid state drive (SSD) series is designed to tackle the tough conditions seen in many embedded environments and to handle the challenges of edge computing.

The Innodisk 2.5” SATA SSD 3TE7 is a SATA III 6.0 Gb/s flash-based disk that adopts the latest SATA III NAND controller with Innodisk’s exclusive L³FW architecture. The upgraded L³ FW architecture, combines Innodisk signature 4K mapping algorithm L² FW architecture with powerful LDPC technology. This ensures the 3TE7 series has outstanding high IOPS, improved data integrity and extended lifespan through reducing the bad block number happening. A built-in thermal sensor and iData Guard assures data integrity and reliability of the 2.5” SATA SSD 3TE7 for industrial applications.

The Innodisk 2.5” SATA SSD 3TG6-P is a SATA III 6Gb/s solid state disk, which delivers top performance especially in random data transfer rate. Its reliability makes it ideal for embedded systems, industrial computing and enterprise fields. The 3TG6-P 2.5” SSD is designed with Innodisk-owned technology to ensure the data integrity and highest levels of reliability.

The modules can incorporate AES encryption for data security and End-to-End Data Path Protection to ensure error correction at every point of data transfer. The modules can also be fitted with Innodisk’s trio of power stabilizing technologies iCell™, iPower Guard™ and iData Guard™ to further strengthen data integrity in areas susceptible to power fluctuations.

Features & Benefits:

  • Vibration: 20G @7~2000Hz
  • Shock: 1500G @ 0.5ms
  • Storage Temperature: -55°C ~ +95°C
  • MTBF: 3 million hours
  • 6 W

Applications:

  • 5” SATA Slim SATA III solution for industrial field
  • High IOPS
  • iSMART disk health monitoring
  • AES-256 encryption (3TE7)
  • iPower Guard for protecting unstable start up and shut down (3TE7)
  • iData Guard for abnormal power failure

As a franchised distributor for Innodisk, New Yorker Electronics supplies the full portfolio of Innodisk Flash Storage products including SSD, SATADOM, mSATA, Embedded Disk Cards, as well as Embedded, Server, Wide-Temperature and Customized Draw Modules and Embedded Peripherals.

About New Yorker Electronics
New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).