Sep 5, 2019 | Uncategorized
First of all, the invite list needs to be put together and it is important to consider who you want to invite. In general the grandparents, the in-laws, close friends and family members will attend. As parents, you have the opportunity to invite whoever you want and who you think it is suitable to be with you in such a special day. Once you have a number, you can make other arrangements, such as choosing a catering firm that will provide great food. After christenings Cyprus it is traditional to throw a party, no matter if you want a big one or a more intimate one. It is not out of the ordinary to book an entire venue and hire catering professionals.
Having a budget for christenings Cyprus is highly recommended, as you will know how much to spend on each service. This way, you can decide if you want to throw the party at home and simply decorate the place and arrange seating for everyone or if you want to rent a venue. If you choose to go to a venue, you will need a lot of rentals and services, including tables and chairs, tableware, flower arrangements and decorations, music, a professional photographer and videographer, a bar and such. Guests expect to be treated nicely if you throw a party and they want to enjoy good food, drinks, music and celebrate the new addition to the family in style.
Regardless of the christening location, various decoration equipment is necessary, especially if you have a theme in mind or you are going with a certain color scheme. Some people settle with some balloons and a cake, while others want something more. There are so many options these days and beautiful ways to decorate every part of the venue and the chairs, tables and such. Besides the usual balloons, there are helium balloons and very large ones, including Chinese lanterns if you want something out of the ordinary. These decorate the ceiling nicely and add extra flair. At the entrance or in front of the venue, parents can position signs to help direct guests in the right direction and point out if there is a dedicated area of interest.
Many children usually take part at christenings and you can dedicate some time to come up with entertainment, so they don’t get bored during the celebration. Balloon modelling, face painting, magic shows and bouncy castles are some of the most popular choices and bound to attract attention and their interest. Parents will be especially grateful, as they will have some spare time to socialize, enjoy the music, food and drinks. Including some activities in the event is strongly encouraged, because everyone should have a good time and celebrate the little one and taking advantage of the gathering and what it stands for. Any location can be completely transformed with decoration equipment.
Organizing any type of party is easier when you have reliable vendors by your side. You can either purchase or rent decorations, but if you don’t want to make a substantial investment, it is better to rent items and when the event is over, give them back to providers. Once you know the date of the celebration and the number of guests, you can start making additional arrangements. If you have the time, you can do it all on your own, but you can always request assistance from professionals and they will manage all aspects, simply presenting options and discussing with vendors on your behalf. This way, you don’t have to do much organizing and work and get to enjoy the big day and spend more time with your guests. No matter the desired theme and how small or big the event is, you can improve it and make it memorable with the right supplies and services.
Resource Box: Are you looking for rentals and event services for planning http://www.partycity.com.cy/ christenings Cyprus ? Look no further, as this website will help you a lot and make the process easier to handle. You will find everything needed, including http://www.partycity.com.cy/ decoration equipment of all kind.
Sep 5, 2019 | Business
A birthday party is a special event, as all close friends and family members are invited and sometimes there is a lot of pressure on the organizer. The first most important aspects to establish are the number of guests invited and the location. Once you have established these aspects, you can easily handle the rest. A successful party requires good food, drinks, music and decorations and each of them are offered by specialized vendors that answer to all requests and present possibilities. Especially if it is a surprise party, you need to reserve in advance and make sure every vendor arrives in time to organize the details, arrange the location and prepare it before guests start arriving. The good news is that nowadays it is easy to find specialized services, by looking online and making reservations directly.
One aspect that influences most birthday party aspects is budget. Without having a clear one in mind, you can easily overspend on details that might not have such a huge impact after all. What counts is to be realistic and the truth is that nowadays there are so many options regarding any service and rentals that you can organize a party with great taste, without breaking the bank. Moreover, you can also choose a theme, especially if you know the person loves something in particular or is a big fan of a certain sport, movie, animation character and such. You can easily find some amazing tips online, based on the person’s age and preferences and afterwards you can focus on the theme. The idea is to be consistent and incorporate it within decorations, invitations and food.
Where are you throwing the party, many people do it in their backyard, but if you need to plan something bigger and there are many guests invited, then it is best to book a venue. In this case, you need to take planning further and ask the venue if they offer tables, chairs, tableware, cutlery, and such. Luckily, table rentals are easy to find and you can match the décor of the venue and the theme with the tables, decorating them afterwards however you please. Providers are very generous in their offer and you can easily find vintage designs, classic, modern tables and chairs, in popular colors that go with any color scheme.
In fact, table rentals offer great benefits and it is always better to rent them rather than settling with some designs the venue offers. Not to mention that buying them is not worth it, as you need to pay for the shipping as well and have to deposit them once the celebration is over. They offer great flexibility, as you can rent as many as you need, based on your guest list and how many people you want to sit down at the table. Providers delivering tables and chairs transport them directly to the venue and if you establish in advance, they can arrange them to meet your needs and preferences. Afterwards, you can decorate them; add centerpieces, place glasses, plates, cutlery, and anything you have in plan.
Every occasion is different and needs to be celebrated in a certain way and this is why renting some elements is more beneficial, as they will meet the theme and your style. You can easily find providers working in the field that mention what they have available during that date and costs implied. If you ask event planners, they will point out which are the most trusted vendors and collaborate with them directly. Searching online is easier than ever and you can design a party however you please, no matter if it is a small celebration or a big event, such as weddings, christenings and such. In some cases, you can organize everything at home, while others require more time and planning and additional services from specialized providers.
Resource Box: If you are throwing a http://www.partycity.com.cy/ birthday party , you will certainly require a lot of rentals and services. Instead of looking in various places for them, you can find all essentials right here. You can find http://www.partycity.com.cy/ table rentals to meet the décor of the venue and which falls within the budget as well.
Sep 5, 2019 | Health and Wellness
According to the World Health Organization (WHO), each year, an estimated 40 million people worldwide are in need of palliative care and 78% of them live in low-and middle-income countries. In another shocking statistic, only about 14% of people who need palliative care currently receive it. The approach of Palliative Care improves the quality of life of patients and their families who are facing problems associated with life-threatening illnesses. It prevents and relieves suffering through the early identification, correct assessment and treatment of pain and other problems, whether physical, psychosocial or emotional.
IHHC’s interdisciplinary Palliative Care Program covers conditions like, hospice care, patients with advanced diseases like terminal cancers and other progressive conditions where the patient needs symptomatic relief.
A life lived with dignity is a life worth living. IHHC’s Palliative Care enriches the quality of life for patients by providing clinical care with compassion both emotionally and physically in the comfort of their own homes. IHHC’s specialized Palliative Care Program deals with long-term medical problems by providing home nursing services through a multidisciplinary team of healthcare professionals. Some of these services include, but are not limited to:
• 12-24 hours of nursing support provided by nurses who have a minimum of 2 years nursing and critical care training
• 12-24 hours of medical caretaker support
• Counselling
• Physiotherapy
• Equipment based on client requirements like Ventilator, Suction Machine, Monitor and Hospital Bed
• Consumables (paid for by the patient) – depending on availability
Sep 5, 2019 | Tech
A high-speed vision system uses five cameras and a variety of lighting techniques to inspect medical device wells for defects
In the past, the process of checking trays of plastic wells used in microwell plates was carried out manually by operators who removed trays from a conveyor belt on a production line to visually inspect them. However, the subjective nature of the operation meant that the process was prone to human error.
So when a China medical manufacturer decided to automate the inspection of its plastic medical device products, it turned to engineers at Sipotek Vision Systems to build an automated special purpose vision machine specifically for the purpose, including full validation to GAMP5 (Good Automated Manufacturing Practice) pharmaceutical regulations.
Microwell plates typically have ninety-six white plastic wells arranged in rows that are used as small test tubes in laboratories to analyze cell cultures. During a multi-stage production process, the wells are coated with active chemical compounds. In use, these compounds bind to specific targets when serum or plasma is deposited in the wells. When they do, they cause color changes that can be detected by medical instruments to test for the presence of disease.
machine-vision
Ensuring the consistency of the color of the coated white plastic wells is important to ensure that when they are used in the field, the color change detected by the medical instrumentation provides a reliable indication of the chemical changes taking place in the sample.
machine vision system manufacturers
The issue is compounded by the fact that chemicals used in the coating process are themselves colored. Although the chemicals should be washed from the wells in the production process, if any remain, when serum or blood is tested for disease, the instrumentation could produce erroneous results. Aside from ensuring the consistency of the color of the wells, detecting any particulate matter that might remain in the well as a result of the production process is also vital to ensure the accuracy of such tests.
Interior and exterior
In the design of the Sipotek system, four vision-based inspection stations are used to check the interior and exterior color of the wells, and ascertain whether any particulates are present. Once any wells that fail to meet the manufacturer’s specification are removed from the tray by the system, a final vision check is performed to ensure the reject process was successful
In operation, each individual tray of ninety-six wells is picked off an existing conveyor line by a custom pick and place unit that uses a combination of pneumatics and an Allen Bradley linear axes drive. At a rate of one every three seconds, the unit places them onto a servo-controlled walking beam system that employs multiple grippers which engage the trays from either side and indexes them sequentially through the vision inspection, well removal and tray removal stations.
coupon code: freeshipping on any order from topvision.net
Prior to the first inspection, a data matrix scanner reads a data matrix code on the outside of the plastic tray containing the wells and transfers the data over an Ethernet interface to the PLC. In this way, each tray can be tracked through the process, so that if any faulty wells, or faulty trays of wells, are identified by the vision system, they can be removed from the line at a later stage. In addition, all data and results are transferred to the customer’s master database.
Gray levels
At the first vision inspection station, the coated, plastic wells are inspected to verify that their whiteness falls within a given specification. To do so, the station employs a monochrome line scan camera. This camera is mounted inside a stainless steel shroud to shield it from ambient light.
As the shroud containing the camera transverses the top of the tray of wells under servo control, the bottom of the tray is illuminated by a high intensity light which moves in synchronization with the camera.
The gray scale check is one of the key functions performed by the vision system. The monochrome line scan camera chosen for the task enables high resolution images to be captured and processed in an acceptable one second time frame, while the single wavelength red line light provides consistent lighting across all of the wells.
An image captured by the line scan camera from above a tray of wells is transferred over a Camera Link interface to one of three Industrial PCs in the system where the image is processed using Sipotek software.
The software then consecutively computes the gray scale intensity of the areas in the image bounded by the circular edge of the wells. More specifically, it calculates the maximum and minimum gray scale intensity, the average and the standard deviation from the average.
Having done so, the gray scale intensities are compared to a template of acceptable gray scale values. This template is created during system set up by teaching the system what range of gray scale values are unacceptable by capturing images of failed parts. Should one or more of the wells fail the inspection, the location of the well within the tray is transferred over an Industrial Ethernet/IP network to the PLC which logs the details.
Machine Vision Camera
Color check
Having inspected the inside of the wells for gray level intensity, the tray of wells is indexed by the walking beam system to the second inspection station. Here, the wells are checked to determine whether any colored compounds are present and that there is no particulate matter inside them.
To do so, this vision inspection station uses two area-scan cameras. Housed in a stainless steel shroud, the cameras each capture an image of one half of the top of the tray of wells through an on-axis flat dome light. This light requires only a fraction of the space of traditional dome lights, while providing the desired wide angle of illumination.
Images captured by the two area scan cameras are transferred to a second Intel i7 based PC over a FireWire interface for processing. Sipotek software analyzes the same regions of interest in the images that were analyzed during the grey scale analysis process – namely the area within the inside of the wells. At this stage, however, the images are checked for color consistency.
To do so, the system is first calibrated by presenting the system with a number of reject parts. RGB values of those images are then used to create a template of color values. During operation, the software compares the RGB values of the images of the wells with the range of template color values to determine whether a product falls within a given tolerance range.
At this stage, the interior of the wells are also checked to determine if any particulate matter has been left in the well during production. To do so, the software performs a thresholding operation on the image to separate the image background with regions of the image that correspond to any foreign objects. If a well fails due to its unacceptable color, or because of the presence of particulates, the location of the well in the tray is transferred over the Profibus network to the PLC.
The tray of wells is then indexed to a third vision inspection stage where the colors of the underside of the wells are inspected To do so, an image of the bottom of the wells is captured with a color line scan camera fitted with a telecentric lens. As the camera transverses the underside of the tray, it is illuminated by a backlight from above and a fiber optic light from below which moves in synchronization with the camera.
The image of the underside of the wells is transferred to a third Intel i7 industrial PC over a Camera Link interface. Here, the software identifies the areas in the images that represent the bottom of the wells and compares the color in the images with a second template that represents a range of reference colors in RGB color space. As before, if any well fails the inspection process, the location of the well within the tray is transferred to the PLC.
Rejection and verification
Having verified the color consistency of the wells and inspecting them for contamination, the tray of wells is then indexed to a fourth station where any unacceptable wells are removed.
To do so, the system employs a servo-controlled electromechanical actuator fitted with a custom built pneumatic system with ninety six heads that can each be actuated individually. In operation, the head is moved over the tray of wells, and under control of the PLC, a vacuum is applied to one or more of the heads to remove any defective wells from the tray. Having picked out any faulty parts, the actuator moves the head over a reject bin, the vacuum is removed, and the wells are deposited into it.
The walking beam system then indexes the tray of acceptable parts to a fourth inspection station where the system verifies that the rejected parts have been removed from the tray. To do so, the tray is lit from beneath by a backlight while an area scan cameras fitted with a lens captures an image of the top of the tray.
The image is then transferred over a FireWire interface to the second PC, which, in addition to processing the images from the second vision inspection stage, also performs a blob analysis on the image. This enables regions in the image that differ in brightness compared to areas surrounding them to be identified, resulting in the identification of the location of any missing rejected wells.
Pass or fail results from the verification stage are transferred over the Profibus network to the PLC. If all the failed wells have been removed from the tray, the PLC instructs a second servo-controlled pick and place machine to place the tray back onto the conveyor from which it was originally removed, after which the trays are stacked and manually packed.
However, if any of the wells have not been removed, the PLC instructs the same pick and place system to remove the tray from the machine, placing it on a conveyor which transports the tray into a reject bin. The rejection mechanism also enables the manufacturer to reject trays of wells should any other non-vision related failures be identified earlier in the production process.
To enable an operator to visualize the operation of the machine, each of the PCs are connected to flat panel displays with an HMI interface designed within the Sipotek software that highlights the progress of the vision inspection at each of the inspection stages. To do so, the displays provide a visual indication of which of the wells within the tray have passed or failed the inspection stages by highlighting their location on the tray with either a green or red indicator.
Aside from capturing the data from the vision stations for the purpose of identifying bad parts, data from each of the stations is also transferred over an Ethernet network to a PC which maintains a statistical database that highlights the type of rejects that are occurring. This data provides a means to analyze the effectiveness of earlier stages in the production process.
Since it was installed at the medical device manufacturer, the vision inspection station has proved its worth, inspecting the trays of medical device wells at a rate of 1,920 parts per minute. The speed of the process and the objective nature of the vision inspection process have eliminated the errors incurred in the manual inspection process that was previously employed.
Sep 5, 2019 | Business
Factory layout projects benefit from rapid implementation and the associated low start-up costs
Many project managers still rely on 2D when it comes to factory layout. But there is 3D software that bridges both worlds.
MPDS4 starter package: Factory modelling, implementation, and training
With the 2D/3D software, 3D models can be automatically generated from a 2D layout. This provides two key benefits for designers: first, the high speed of working in 2D, and second, the advantages of a 3D model. A specially designed starter package for factory layout enables projects to be quickly started and rapidly implemented.
Effective use of vertical space
The advantages of 3D design are manifold. In many complex production lines, it is vital that vertical space is used effectively during the manufacturing process. This requires precise planning at the design stage. As a result, collision detection and 3D visualization are becoming increasingly important for factory layouts. The 3D approach makes it easy to create high-quality designs, thereby avoiding expensive problems and delays during construction. For many Engineering departments though, 3D still seems like a big step to take.
Size-independent, high-performance design
“Many companies in the UK today still use 2D CAD software as their primary tool for factory design. Although well aware of the benefits of a 3D approach, most have tried Mechanical 3D CAD systems and have quickly come up against their limitations, such as size constraints, poor performance, or inaccuracy” explains Mark Simpson of engineering software developer CAD Schroer.
A Quick Start for 3D Factory Projects
CAD Schroer makes it easier for customers to transition from 2D to 3D for large projects. Its factory layout software is easy to learn even for 2D users with no previous 3D experience. Existing 2D drawings can be imported and quickly used as the basis for 3D layouts, walk-throughs and visualizations. By placing 2D equipment symbols at the required location on the 2D layout, the corresponding 3D models are automatically loaded at the same location in 3D. The starter package for factory layout further increases productivity.
“We can model existing factories, including the machinery,” continues Mark Simpson. “Or, depending on your needs, we can layout a new production line in the required location, quality checking any 2D drawings and 3D files provided. We supply the complete 3D lifecycle model clients need to plan subsequent changes and visualise them in 3D.” The starter package for digital factory layout with MPDS4 is a shrewd investment for factory projects.
>> Starter package for factory projects
https://www.cad-schroer.com/services/consultancy/quickstart/
